BioInstrumentation Lab:Publications

From BioInstrumentation Lab
Jump to: navigation, search

Contents

Refereed Journal Articles

2013

  1. Chen, Y. and Hunter, I. W. "`Nonlinear Stochastic System Identification of Skin Using Volterra Kernels." Annals of Biomedical Engineering, 2013, 41 (4), 847-862. [1].
  2. Sandford, E. J., Chen, Y., Hunter, I. W., Hillebrand G. and Jones, L. "`Capturing skin properties from dynamic mechanical analyses." Skin Research and Technology, 2013, 15, e339-e348. [2].

2012

  1. Hemond, B.D., Wahab, A., Spanbauer, A., Hunter, I.W., Hughey, B.J., Jones, L.A. "MICA: An Innovative Approach to Remote Data Acquisition." IEEE Instrumentation and Measurement Magazine, 2012, 15 (5), 22-27.
  2. Chen, Y. and Hunter, I.W. "Stochastic System Identification of Skin Properties: Linear and Wiener Static Nonlinear Methods." Annals of Biomedical Engineering, 2012, 40 (10), 2277-2291. [3]
  3. Taberner, A., Hogan, N.C., and Hunter, I.W. "Needle-free Jet Injection Using Real-time Controlled Linear Lorentz-force Actuators." Medical Engineering and Physics, 2012, doi:10.1016/j.medengphy.2011.12.01. [4]
  4. Chang, J.H., Aleman de Leon, C.R., and Hunter, I.W. "Self-Assembled, Nanostructured Polypyrrole Films Grown in a High-Gravity Environment." Langmuir, 2012, 28 (10), 4805-4810. [5]

2011

  1. Pillai, P.V., Hunter, I.W., and Hernandez, E. "Application of Stochastic System Identification to the Study of the Compliance of Electroactive Polymers." Review of Scientific Instruments, 2011, 82 (2), 025103. [6]
  2. Silberstein, M.N., Pillai, P.V., and Boyce, M.C. "Biaxial elastic–viscoplastic behavior of Nafion membranes." Polymer, 2011, Volume 52 (2), 529-539 . [7]
  3. Chang, J.H., and Hunter, I.W. "A Superhydrophobic to Superhydrophilic In Situ Wettability Switch of Microstructured Polypyrrole Surfaces." Macromolecular Rapid Communications, 2011, 32 (9-10), 718-723. [8]
  4. Ruddy, B. P. and Hunter, I. W. "Design and optimization strategies for muscle-like direct-drive linear permanent-magnet motors." The International Journal of Robotics Research 30(7), pp. 834-845, 2011. [9]
  5. Hemond, B. D. Taberner, A., Hogan, C., Crane, B., and Hunter, I. W. "Development and performance of a controllable autoloading needle-free jet injector." Journal of Medical Devices 5 (1), pp. 015001-1-015001-7, 2011.[10]

2009

  1. Yang, G., Kwon, D., and Jones, L.A. "Spatial acuity and summation on the hand: The role of thermal cues in material discrimination." Attention, Perception, & Psychophysics, 2009, 71, 156-163. [11]
  2. Jones, L.A., Kunkel, J. and Piateski, E. "Vibrotactile pattern recognition on the arm and back." Perception, 2009, 38(1), 52-68. [12]
  3. Forest, C. R., Woodruff, B., Buckley, D., Thilly, W.G., and Hunter, I.W. “Assembly and Constraint Technology for Large Arrays of Capillaries,” Precision Engineering, 2009, 33(3), 275-283. [13]

2008

  1. Pytel, R.Z., Thomas, E.L., Chen, Y., and Hunter, I.W. “Anisotropic Actuation of Mechanically Textured Polypyrrole Films.” Polymer, 2008, 49(5), 1338-1349. [14]
  2. Ekstrøm, P.O., Khrapko, K., Li-Sucholeiki, X.-C., Hunter, I. W., and Thilly, W.G. “Analysis of Mutational Spectra by Denaturing Capillary Electrophoresis.” Nature Protocols, 2008, 3(7) 1153-1166. [15]
  3. Pytel, R.Z., Thomas, E.L., and Hunter, I.W., "In-situ Observation of Dynamic Elastic Modulus in Polypyrrole Actuators," Polymer, 2008, 49(8), 2008-2013. [16]
  4. Jones, L.A. and Held, D.A. "Characterization of tactors used in vibrotactile displays." Journal of Computing and Information Sciences in Engineering, 2008, 8(4), 044501. [17]
  5. Jones, L.A. and Ho, H-N. "Warm or cool, large or small? The challenge of thermal displays". IEEE Transactions on Haptics, 2008, 1(1), 53-70. [18]
  6. Ho, H. and Jones, L.A. "Modeling the thermal responses of the skin surface during hand-object interactions." Journal of Biomechanical Engineering, 2008, 130(2), 21005. [19]
  7. Jones, L.A. and Sarter, N. "Tactile displays: Guidance for their design and application." Human Factors, 2008, 50(1), 90-111. [20]
  8. Yang, G., Jones, L.A., and Kwon, D. "Use of simulated thermal cues for material discrimination and identification with a multi-fingered display." Presence, 2008, 17(1), 29-42. [21]
  9. Park, M.-A., Zimmerman, R.E., Taberner, A., Kaye, M.W., and Moore, S.C. "Design and Fabrication of Phantoms Using Stereolithography for Small-Animal Imaging Systems." Molecular Imaging and Biology, 2008, 10(5), 231-236. [22]

2007

  1. Madden, J.D., Rinderknecht, D., Anquetil, P.A., and Hunter, I.W. “Creep and Cycle Life in Polypyrrole Actuators.” Sensors and Actuators A, 2007, 133(1), 210-217. [23]
  2. David. R. and Hunter, I.W. “A Liquid Expansion Microcalorimeter.” Journal of Thermal Analysis and Calorimetry, 2007, 90(2), 597-599. [24]
  3. Tangorra, J.L., Anquetil, P.A., Fofonoff, T., Chen, A.Y., Del Zio, M., and Hunter, I.W. “The Application of Conducting Polymers to a Biorobotic Fin Propulsor.” Bioinspiration and Biomimetics, 2007, 2, S6-S17. [25]
  4. Garcia-Webb, M., Taberner, A., Hogan, N.C., and Hunter, I.W. “A Modular Instrument for Exploring the Mechanics of Cardiac Myocytes.” American Journal of Physiology: Heart and Circulatory Physiology, 2007, 293(1), H866-874. [26]
  5. Tangorra, J.L., Davidson, S.N., Hunter, I.W., Lauder, G.V., Madden, P.G., Mittal, R., Dong, H., and Bozkurttas, M. “The Development of a Biologically Inspired Propulsor for Autonomous Undersea Vehicles.” IEEE Journal of Oceanic Engineering, 2007, 32(3), 533-550. [27]
  6. Forest, C.R., Saez, M.A., and Hunter, I.W. “Microforging Technique for Rapid, Low-cost Fabrication of Lens Array Molds.” Applied Optics, 2007, 46(36), 8668-8673. [28]
  7. Ho, H. and Jones, L.A. "Development and evaluation of a thermal display for material identification and discrimination." ACM Transactions on Applied Perception, 2007, 4(2), 13. [29]

2006

  1. Pytel, R.Z., Thomas, E.L., and Hunter, I.W. “Anisotropy of Electroactive Strain in Highly Stretched Polypyrrole Actuators.” Chemistry of Materials, 2006, 18(4), 861-863. [30]
  2. Madden, J.D., Barisci, J.N., Anquetil, P.A., Spinks, G.M., Wallace, G.G., Baughman, R.H., and Hunter, I.W. “Fast Carbon Nanotube Charging and Actuation.” Advanced Materials, 2006, 18(7), 870-873. [31]
  3. Taberner A.J. and Hunter I.W. “Calibration of a Horizontally Acting Force Transducer with the Use of a Simple Pendulum.” Review of Scientific Instruments, 2006, 77, 125103. [32]
  4. Ho, H. and Jones, L.A. "Contribution of Thermal Cues to Material Discrimination and Localization." Attention, Perception, & Psychophysics, 2006, 68(1), 118-128. [33]
  5. Jones, L.A., Lockyer, B., and Piateski, E. "Tactile display and vibrotactile pattern recognition on the torso." Advanced Robotics, 2006, 20(12), 1359-1374. [34]
  6. Jones, L.A. and Piateski, E. "Contribution of tactile feedback from the hand to the perception of force." Experimental Brain Research, 2006, 168(1-2), 298-302. [35]

2005

  1. Crane, B., N.C. Hogan, H. Sudo, W.G. Thillly, and I.W. Hunter "Real-time PCR measurement by fluorescence anisotropy". Analytical Chemistry, 2005, 77(16), 5129-5134. [36]
  2. David, R. and Hunter, I.W. "A liquid-in-glass thermometer read by an interferometer". Sensors and Actuators A Physical, 2005, 121(1), 31-34. [37]
  1. Taberner, A.J., Hunter, I.W., Kirton, R.S., Nielsen, P.M.F., and Loiselle, D.S. "Characterization of a flow-through microcalorimeter for measuring the heat production of cardiac trabeculae". Review of Scientific Instruments, 2005, 76, 104902. [38]
  2. Llinas, R.R., Walton, K.D., Nakao, M., Hunter, I., and Anquetil, P.A. "Neuro-vascular central nervous recording/stimulating system: Using nanotechnology probes." Journal of Nanoparticle Research, 2005, 7(2-3), 111-127. [39]

2004

  1. Madden, J.D.W., Vandesteeg, N.A., Anquetil, P.A., Madden, P.G.A., Takshi, A., Pytel, R.Z., Lafontaine, S.R., Wieringa, P.A. and Hunter, I.W. Artificial muscle technology: physical principles and naval prospects". IEEE Journal of Oceanic Engineering, 2004, 29(3), 706-728. [40]
  2. Madden, P.G.A., Madden, J.D.W., Anquetil, P.A., Vandesteeg, N.A. and Hunter, I.W. "The relation of conducting polymer actuator material properties to performance".IEEE Journal of Oceanic Engineering, 2004, 29(3), 696-705. [41]
  3. Martel, S. and Hunter, I. "Nanofactories based on a fleet of scientific instruments configured as miniature autonomous robots". Journal of Micromechatronics, 2004, 2(3-4), 201-214. [42]
  4. Tangorra, J.L., Jones, L.A. and Hunter, I.W. "System identification of the human vestibulo-ocular reflex during head-free tracking". Journal of Vestibular Research, 2004, 14(6), 419-441. [43]
  5. Fofonoff, T.A., Martel, S.M., Hatsopoulos, N.G., Donoghue, J.P. and Hunter, I.W. "Microelectrode array fabrication by electrical discharge machining and chemical etching". IEEE Transactions on Biomedical Engineering, 2004, 51(6), 890-895. [44]
  6. Madden, J.D.W., Schmid, B., Hechinger, M., Lafontaine, S.R., Madden, P.G.A., Hover, F.S., Kimball, R. and Hunter, I.W. "Application of polypyrrole actuators: feasibility of variable camber foils". IEEE Journal of Oceanic Engineering, 2004, 29(3), 738-749. [45]

2003 and Earlier

  1. Anquetil P.A., Brenan, C.J.H., Marcolli, C., and Hunter, I.W. "Laser Raman spectroscopic analysis of polymorphic forms in microliter fluid volumes". Journal of Pharmaceutical Sciences, 2003, 92(1), 149-160. [46]
  2. Madden, J.D., Cush, R.A., Kanigan, T.S., and Hunter, I.W. "Fast contracting polypyrrole actuators". Synthetic Metals, 2000, 113(1-2), 185-192. [47]
  3. Korenberg, M.J. and Hunter, I.W. "Two methods for identifying Wiener cascades having noninvertible static nonlinearities". Annals of Biomedical Engineering, 1999, 27(6), 793-804. [48]
  4. Madden, J.D., Cush, R.A., Kanigan, T.S., Brenan, C.J, and Hunter, I.W. "Encapsulated polypyrrole actuators". Synthetic Metals, 1999, 105(1), 61-64. [49]
  5. Brenan, C.J.H. and Hunter, I.W. "Volumetric Raman microscopy through a turbid medium". Journal of Raman Spectroscopy, 1996, 27(8), 561-570. [50]
  6. Charette, P.G. and Hunter, I.W. "Robust phase-unwrapping method for phase images with high noise content". Applied Optics, 1996, 35(19), 3506-3513. [51]
  7. Madden, J.D. and Hunter, I.W. "Three-dimensional microfabrication by localized electrochemical deposition". Journal of Microelectromechanical Systems, 1996, 5(1), 24-32. [52]
  8. Korenberg, M.J. and Hunter, I.W. "The identification of nonlinear biological systems: Volterra kernel approaches". Annals of Biomedical Engineering, 1996, 24(2), 250-268. [53]
  9. Hunter, I.W., Jones, L.A., Sagar, M.A., Lafontaine, S.R., and Hunter, P.J. "Opthalmic microsurgical robot and associated virtual environment". Computers in Biology and Medicine, 1995, 25(2), 173-182. [54]
  10. Stein, R.B., Hunter, I.W., Lafontaine, S.R., and Jones, L.A. "Analysis of short-latency reflexes in human elbow flexor muscles". Journal of Neurophysiology, 1995, 73(5), 1900-1911. [55]
  11. Macniel, J.B., Kearney, R.E., and Hunter, I.W. "Identification of time-varying biological systems from ensemble data". IEEE Transactions on Biomedical Engineering, 1992, 39(12), 1213-1225. [56]
  12. Hunter, P.J., Nielsen, P.M.F., Smaill, B.H., Legrice, I.J., and Hunter, I.W. "An anatomical heart model with applications to myocardial activation and ventricular mechanics". Critical Reviews in Biomedical Engineering, 1992, 20(5-6), 403
  13. Jones, L.A. and Hunter, I.W. "Changes in pinch force with bidirectional load forces". Journal of Motor Behavior, 1992, 24(2), 157-164.
  14. Bennett, D.J., Hollerbach, J.M., Xu, Y., and Hunter, I.W. "Time-varying stiffness of human elbow joint during cyclic voluntary movement". Experimental Brain Research, 1992, 88(2), 433-442. [57]
  15. Charette, P.G., Hunter, I.W., and Brenan C.J.H. "A complete high performance heterodyne interferometer displacement transducer for microactuator control". Review of Scientific Instruments, 1992, 63(1), 241-248. [58]
  16. Korenberg, M.J. and Hunter, I.W. "The identification of nonlinear biological systems: Wiener kernel approaches". Annals of Biomedical Engineering, 1990, 18(6), 629-654. [59]
  17. Kearney, R.E. and Hunter, I.W. "System identification of human joint dynamics". Critical Reviews in Biomedical Engineering, 1990, 18(1), 55-87.
  18. Jones, L.A. and Hunter, I.W. "A perceptual analysis of stiffness". Experimental Brain Research, 1990, 79(1), 150-156. [60]
  19. Kearney, R.E. and Hunter, I.W. "Nonlinear identification of stretch reflex dynamics". Annals of Biomedical Engineering, 1988, 16(1), 79-84. [61]
  20. Bates, J.H.T., Hunter, I.W., Sly, P.D., Okubo, S., Filiatrault, S., and Milic-Emili, J. "Effect of valve closure time on the determination of respiratory resistance by flow interruption". Medical and Biological Engineering and Computing, 1987, 25(2), 136-140. [62]
  21. Weiss, P.L., Kearney, R.E., and Hunter, I.W. "Position dependence of ankle joint dynamics—I. Passive mechanics". Journal of Biomechanics, 1986, 19(9), 727-735. [63]
  22. Weiss, P.L., Kearney, R.E., and Hunter, I.W. "Position dependence of ankle joint dynamics—II. Active mechanics". Journal of Biomechanics, 1986, 19(9), 737-751. [64]
  23. Korenberg, M.J. and Hunter, I.W. "The identification of nonlinear biological systems: LNL cascade models". Biological Cybernetics, 1986, 55(2-3), 125-134. [65]
  24. Hunter, I.W. and Korenberg, M.J. "The identification of nonlinear biological systems: Wiener and Hammerstein cascade models ". Biological Cybernetics, 1986, 55(2-3), 135-144. [66]
  25. Weiss, P.L., Kearney, R.E., and Hunter, I.W. "Position dependence of stretch reflex dynamics at the human ankle". Experimental Brain Research, 1986, 63(1), 49-59. [67]
  26. Hunter, I. and Davison, M. "Determination of a behavioral transfer function: White-noise analysis of session-to-session response-ratio dynamics on concurrent VI VI schedules". Journal of the Experimental Analysis of Behavior, 1985, 43(1), 43-59. [68]
  27. Hunter, I.W. and Kearney, R.E. "NEXUS: A computer language for physiological systems and signal analysis". Computers in Biology and Medicine, 1984, 14(4), 385-401. [69]
  28. Jones, L.A. and Hunter, I.W. "Effect of fatigue on force sensation". Experimental Neurology, 1983, 81(3), 640-650. [70]
  29. Kearney, R.E. and Hunter, I.W. "System identification of human triceps surae stretch reflex dynamics". Experimental Brain Research, 1983, 51(1), 117-127. [71]
  30. Hunter, I.W. and Kearney, R.E. "Two-sided linear filter identification". Medical and Biological Engineering and Computing, 1983, 21(2), 203-209. [72]
  31. Hunter, I.W. and Kearney, R.E. "Dynamics of human ankle stiffness: Variation with mean ankle torque". Journal of Biomechanics, 1982, 15(10), 747-752. [73]
  32. Kearney, R.E. and Hunter, I.W. "Dynamics of human ankle stiffness: Variation with displacement amplitude". Journal of Biomechanics, 1982, 15(10), 753-756. [74]
  33. Jones, L.A. and Hunter, I.W. "Force sensation in isometric contractions: a relative force effect". Brain Research, 1982, 244(1), 186-189. [75]
  34. Hunter, I.W. and Davison, M. "Independence of response force and reinforcement rate on concurrent variable-interval schedule performance". Journal of the Experimental Analysis of Behavior, 1982, 37(2), 183-197. [76]

Proceedings Of Refereed Conferences

2011

  1. Chen, Y., Oliveira, J. M., and Hunter, I. W., "Sensor Architecture for a Two-Actuator Robotic Endoscope Tip." in 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 8340-8343, 2011. [77]
  2. Oliveira, J. M., Chen, Y., and Hunter, I. W., "Robotic Endoscope Motor Module and Gearing Design" in 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 7380-7383, 2011. [78]
  3. Ruddy, B. P. and Hunter, I. W., "Design and Optimization Strategies for Muscle-like Direct Drive Linear Permanent Magnet Motors." Robotics: Science and Systems 2010, Zaragoza, Spain, June 2010. [79]
  4. Paster, E. , Ruddy,B. P., Pillai,P. V., and Hunter, I. W., "Multi-Component Single-Substrate Conducting Polymer Actuation Systems and Fabrication Techniques," SPIE Smart Structures/NDE 2011, San Diego, California, March 2011. [80]

2010

  1. Paster,E., Ruddy, B., Pillai, P. V. and Hunter, I. W., "Conducting Polymer-Based Multifunctional Materials" in Applications of Multifunctional Composite Materials, ASME Conference on Smart Materials, Adaptive Structures & Intelligent Systems, Philadelphia, PA, 2010, SMASIS2010-3761.[81]
  2. Pillai, P., Paster, E., Montemayor, L., Benson, C., and Hunter I.W., "Development of Soldier Conformable Antennae Using Conducting Polymers" in the 27th Army Science Conference, Orlando, FL, 2010 [82]
  3. Chen, Y., Tanaka, S., and Hunter, I. W., "Disposable Endoscope Tip Actuation Design and Robotic Platform," in the 32nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2279-2282, 2010. [83]
  4. Paster, E., Ruddy, B.P., Pillai, P. V. and Hunter, I. W., "Closed Loop Performance of Polypyrrole Linear Contractile Actuators." in Micro and Nano Scale Automation (IEEE 2010 International Conference on Robotics and Automation, Anchorage, AK, 2010)
  5. Saez, M.A., Montemayor,L., Pillai,P.V., and Hunter,I.W.,"Fabrication and Characterization of High Aspect Ratio Conducting Polymer Fibers" in Polymer Nanofibers--Fundamental Studies and Emerging Applications, (Mater. Res. Soc. Symp. Proc. Volume 1240E, Warrendale, PA, 2010), 1240-WW04-05.[84]

2009

  1. Montemayor, L, Pillai, P.V. and Hunter, I.W. , "In-situ Measurement of Actuation in Thin Films of Conducting Polymers" in Microelectromechanical Systems — Materials and Devices III, edited by J. Bagdahn, N. Sheppard, K. Turner, S. Vengallatore (Mater. Res. Soc. Symp. Proc. Volume 1222, Warrendale, PA, 2010), 1222-DD03-02.[85]
  2. Chang, J. H. and Hunter, I. W., "Characterization and Control of the Wettability of Conducting Polymer Thin Films.: in Nanoscale Pattern Development (Mater. Res. Soc. Sump. Proc. Vol. 1228E, Boston, MA, 2009) 1228-KK04-03. [86]
  3. Keng, Y., Pillai, P. V. and Hunter, I. W., "The Effect of Ion Delivery on Polypyrrole Strain and Strain Rate under Elevated Temperature." in Microelectromechanical Systems — Materials and Devices III (Mater. Res. Soc. Symp. Proc. Vol. 1222, Boston, MA, 2009) 1222-DD02-10. [87]
  4. Keng, Y., Pillai, P. V. and Hunter, I. W., "Characterizing the Effect of Temperature Increase on Polypyrrole Active Strength and Stress Rate." in Active Materials, Mechanics and Behavior, ASME Conference on Smart Materials, Adaptive Structures & Intelligent Systems, Oxnard, CA, 2009, SMASIS2009-1258.[88]
  5. Pillai, P. V. and Hunter, I. W., "Stochastic System Identification of the Compliance of Conducting Polymers." in Polymer-Based Smart Materials—Processes, Properties and Application, edited by Z. Cheng, Q. Zhang, S. Bauer, D.A. Wrobleski (Mater. Res. Soc. Symp. Proc. Volume 1134, Warrendale, PA, 2009),BB07-03. [89]
  6. Galie, J., Ho, H-N., & Jones, L.A., "Influence of contact conditions on thermal responses of the hand." Proceedings of the third joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, 587-592. 2009. [90]
  7. Chen, Y., and Hunter, I. W., "In vivo characterization of skin using a Wiener nonlinear stochastic system identification method", EMBS '09, 31st Annual International Conference of the IEEE, 6010-6013, 2009. [91]
  8. Pillai, P. V. and Hunter,I.W., "Thermo-Mechanical Characterization of Polypyrrole Compliance using Stochastic System Identification." in Hybrid Organic Synthetic Biomaterials for Sensing and Actuation, IEEE Engineering in Medicine and Biology Conference, Minneapolis, MN, 2009 ,pp 6834-6837 [92].

2008

  1. Jones, L.A. & Ray, K.. "Localization and pattern recognition with tactile displays." Proceedings of the Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, 33-39. 2008. [93]
  2. Tangorra, J.L., Lauder, G.V., Madden, P.G.A., Mittal, R., Bozkurttas, M., and Hunter, I.W., “A Biorobotic Flapping Fin for Propulsion and Maneuvering,” Proceedings of the 2008 IEEE Int’l Conference on Robotics and Automation, Pasadena, CA, May, 2008, 700-705. [94]
  3. Wiedenman, N., Hunter, I., "Towards Programmable Materials - Tunable Material Properties through Feedback Control of Conducting Polymers," Army Science Conference, Orlando, FL, December 2008.
  4. Bae, W. J. , Ruddy, B. P. ,Richardson, A. G. ,Hunter, I. W., and Bizzi, E., "Cortical Recording with Polypyrrole Microwire Electrodes," 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Vancouver, Canada, August 2008. 10.1109/IEMBS.2008.4650531

2007

  1. Ho, H-N., and Jones, L.A. Monitoring skin temperature during hand-object interactions. InfraMation Proceedings, 8, 1-8. 2007.
  2. Ho, H-N., and Jones, L.A. Infrared thermal measurement system for evaluating model-based thermal displays. Proceedings of the second joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, 157-162. 2007. [95]
  3. Jones, L.A., J. Kunkel, & Torres, E.. Tactile vocabulary for tactile displays. Proceedings of the second joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, 574-575. 2007. [96]
  4. Forest, C.R., Thilly, W.G., and Hunter, I.W., “End-column Detector for Capillary Array Electrophoresis: Design and Application to Arrays of 25, 100, and 10,000 Capillaries,” Proceedings of the 21st International Symposium on MicroScale BioSeparations (MSB), Vancouver, BC, Canada, January 13-18, 2007.
  5. Tangorra, J.L., Anquetil, P., Wiedenman, N., Fofonoff, T., Hunter, I.W., “Applications of Conducting Polymers: Robotic Fins and Other Devices,” Proceedings of SPIE Smart Structures and Materials, 14th International Symposium, (Ed. Y. Bar-Cohen), San Diego, CA, March 18-22, 2007. [97]
  6. Forest, C.R., Saez, M.A., and Hunter, I.W., “Microforging Technique for Fabrication of Low Roughness Mold Masters for Injection Molded Lens Arrays,” Proceedings SPIE, OptiFab 2007, Rochester, NY, May , 2007.
  7. Bozkurttas, M., Dong, H., Mittal, R., Tangorra, J.L., Hunter, I.W., Lauder, G.V., Madden, P.G., “CFD-based Analysis and Design of Biomimetic Flexible Propulsors for Autonomous Underwater Vehicles,” Proceedings of AIAA Fluid Dynamics Conference and Exhibit, , Miami, FL, June 2007, AIAA-2007-4213.
  8. Forest, C.R., Saez, M.A., and Hunter, I.W., “Microlens Characterization Using Contact Profilometry and Point-spread Function Measurement,” Proceedings of the 22nd Annual Meeting of the American /Society for Precision Engineering, Dallas, TX, October, 2007.

2006

  1. Forest, C.R., Buckley, D., Collier, I., and Hunter, I.W., "Mass assembly technology for large arrays of capillaries." Proceedings of the Twentieth International Symposium on MicroScale Bioseparations (MSB) , Amsterdam, Netherlands, January, 2006.
  2. Forest, C.R., Woodruff, B., Hunter, I.W. Accurate, repeatable, and replaceable constraint of capillary arrays using a micro-fabricated device. Proceedings of the Twentieth International Symposium on MicroScale Bioseparations (MSB) , Amsterdam, Netherlands, January, 2006.
  3. Garcia-Webb, M.G.; Taberner, A.J.; Hogan N.C.; Hunter, I.W., “Measurement of the Passive and Active Dynamic Stiffness of Individual Ventricular Myocytes,” Biophysical Society 50th Annual General Meeting. Salt Lake City, UT, February 2006, pp. 18-22.**
  4. Hemond, B.D, D.M. Wendell, C. Hogan, A.J. Taberner, I.W. Hunter, "A Lorentz-Force Actuated Autoloading Needle-free Injector", Proc. 28th Annual International Conference of the IEEE Engineering in Medicine and Biology Society , 2006. [98]
  5. Ho, H. and Jones, L.A. "Thermal Model for Hand-Object Interactions," IEEE Proceedings of the 14th Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, Alexandria, Virginia, 2006, pp. 461-467.
  6. Jones, L., Deo, N., & Lockyer, B. Wireless physiological sensor system for ambulatory use. Proceedings of the International Workshop on Wearable and Implantable Body Sensor Networks, 146-149. 2006.
  7. Hogan, N.C., B.D. Hemond, D.W. Wendall, A.J. Taberner, and I.W. Hunter Delivery of Active Collagenase to Skin Using a Lorentz-Force Actuated Needle-Free Injector, Proc. 28th Annual International Conference of the IEEE Engineering in Medicine and Biology Society , 2006. [99]
  8. Ruddy, B., Watanabe, H., Hunter, I., and Llinas, R.R. Production of Conducting Polymer Nanowires for Use as Intravascular Neural Recording Electrodes, Proceedings of the 2006 NSTI Nanotechnology Conference and Trade Show, May 7-11, 2006, Boston, Massachusetts, U.S.A. Abstract number: 1059.
  9. Taberner, A.J., N.B. Ball, N.C. Hogan, I.W. Hunter A Portable Needle-free Jet Injector Based on a Custom High Power-density Voice-coil Actuator, Proc. 28th Conference of the IEEE Engineering in Medicine and Biology Society , 2006. [100]
  10. Wendell, D.M., B.D. Hemond, N.C. Hogan, A.J. Taberner, I.W. Hunter The Effect of Jet Parameters on Jet Injection, Proc. 28th Annual International Conference of the IEEE Engineering in Medicine and Biology Society , 2006. [101]
  11. Tangorra, J.L., Davidson, S.N., Madden, P.G., Lauder, G.V., Hunter, I.W., “A Biorobotic Fin for Autonomous Undersea Vehicles,” Proceedings of the Engineering in Medicine and Biology Society, New York, NY, September 2006. [102]
  12. Forest, C.R., Beltran, M.J., and. Hunter, I.W., “Passively Aligned 100-port Micro-fluidic Connector,” Proceedings of the 21st Annual Meeting of the American Society for Precision Engineering, Monterey, CA, V. 39, p. 443,October, 2006.
  13. Pytel, R.Z., Krikorian, V., Thomas, E.L., Hunter, I.W., Structure/Property Relationships in Polypyrrole Actuators, Materials Research Society Fall Meeting, Boston, MA, November 27-December 1, 2006.

2005

  1. Forest, C.R., Ball, N.B., Fofonoff, T.A., Hunter, I.W. Two-dimensional capillary array electrophoresis end-column flouorescence detection. 18th International Symposium on MicroScale Bioseparation (MSB), New Orleans, LA, February 2005.
  2. Lauder, G.V., Madden, P.G., Hunter, I.W., Tangorra, J., Davidson, S.N., Proctor, L., Mittal, R., Dong, H., Bozkurttas, M. Design and performance of a fish fin-like propulsor for AUVs. Proceedings of AUSI 13th Annual International Symposium on Unmanned Untethered SubmersibleTechnology (UUST), Durham, N.H., August , 2005.
  3. Forest, C.R., Crane, B., Hunter, I.W. Micro-well array interface for capillary array electrophoresis. Proc. of the Ninth International Conference on Miniaturized Chemical and Biochemical Analysis Systems, Boston, MA, October 2005.

2004

  1. Anquetil, P.A., Rinderknecht, Vandesteeg, N., Madden, J.D. and Hunter, I.W. Large strain actuation in polypyrrole actuators. Proceedings of the SPIE: Smart Structures and Materials 2004: Electroactive Polymer Actuators and Devices (EAPAD), Yoseph Bar-Cohen, Editor, July 2004, 5385, 380-387.
  2. Anquetil, P. A., Pytel, R. Z., Taberner, A. and Hunter, I. W. iLabNoteBook: A digital laboratory notebook based on the microsoft tablet PC platform. Proceedings of the seventh IASTED international conference Computers and Advanced Technology in Education. August 16-18, 2004, Kauai, Hawaii, USA. Pages 381-386
  3. Bowers, T.A., Anquetil, P., Hunter, I. and Hogan, N., Analysis and modeling of electro-mechanical coupling in an electroactive polymer-based actuator. Materials Research Society Symposium Proceedings, 2004, 785, 127-132.
  4. Ho, H. and Jones, L.A. "Material Identification Using Real and Simulated Thermal Cues," Proceedings of 26th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, San Francisco, California, 2004, pp. 2462-2465.
  5. Garcia-Webb, M.G., Hunter, I.W. and Taberner, A.J. An apparatus for high throughput nanomechanical muscle cell experimentation. Proceedings of 26th Annual International Conf. IEEE Engineering in Medicine and Biology Society, September 1-5, 2004, pp. 2018-2021.
  6. Taberner, A.J., Kirton, R.S., Nielsen, P.M.F., Loiselle, D.S. and Hunter, I.W. A sensitive flow-through microcalorimeter for measuring the heat production of cardia trabeculae. Proceedings of 26th Annual International Conf. IEEE Engineering in Medicine and Biology Society, September 1-5, 2004, pp. 2030-2033.
  7. Vandesteeg, N., Anquetil, P.A. and Hunter, I.W. Poly(3,4-ethylenedioxythiophene) actuators: the role of cation and anion choice. Proceedings of the SPIE: Smart Structures and Materials 2004: Electroactive Polymer Actuators and Devices (EAPAD), Yoseph Bar-Cohen, Editor, July 2004, 5385, 182-189.

2003 and Earlier

  1. Anquetil, P.A., Yu, H., Madden, J.D., Swager, T.M. and Hunter, I.W. Recent advances in thiophene-based molecular actuators. Proceedings of the SPIE: Smart Structures and Materials 2003: Electroactive Polymer Actuators and Devices (EAPAD), Yoseph Bar-Cohen, Editor, July 2003, 5051, 42-53.
  2. Anquetil, P.A., Brenan, C.J.H., Marcolli, C. and Hunter, I.W. Laser Raman spectroscopic analysis of polymorphic forms in microliter fluid volumes. Journal of Pharmaceutical Sciences, 2003, 92, 149-160.
  3. Crane, B., Sudo, H., Thilly, W.G. and Hunter, I.W. Towards fluorescence anisotropy detection for real-time PCR assays.Proceedings of the 25th Annual International Conference of the IEEE, 2003, 4, 3060-3063.
  4. Fofonoff, T., Martel, S. and Hunter, I.W. Assembly-ready brain microelectrode arrays. Proceedings of the 25th Annual International Conference of the IEEE Engineering in Medicine and Biology Conference, 2003, 17-21. [103]
  5. Green, J.R., Korenberg, M.J., David, R. and Hunter, I.W. Recognition of adenosine triphospate binding sites using parallel cascade system identification. Annals of Biomedical Engineering, 2003, 31, 462-470.
  6. Madden, J., Schmid, B., Botha, R., Hechinger, M., Lafontaine, S., Madden, P., Hover, F., Hunter, I. Polymer actuated variable Camber foils. Proceedings of AUSI 13th Annual International Symposium on Unmanned Untethered Submersible Technology (UUST), Durham, August 24-27, 2003.
  7. Madden, J.D., Schmid, B., Lafontaine, S.R., Madden, P.G.A., Hover, F.S., McLetchie, K. and Hunter, I.W. Conducting-polymer-driven actively shaped propellers and screws. Proceedings of the SPIE: Smart Structures and Materials 2003: Electroactive Polymer Actuators and Devices (EAPAD), Yoseph Bar-Cohen, Editor, July 2003, 5051, 437-441.
  8. Opila, D., Madden, P., Schmid, B. Biomimmetic active control of propulsor noise using conducting polymers. Proceedings of AUSI 13th Annual International Symposium on Unmanned Untethered SubmersibleTechnology (UUST), Durham, August 24-27, 2003.
  9. Vandesteeg, N., Madden, P.G.A., Madden, J.D., Anquetil, P.A. and Hunter, I.W. Synthesis and characterization of EDOT-based conducting polymer actuators. Proceedings of the SPIE: Smart Structures and Materials 2003: Electroactive Polymer Actuators and Devices (EAPAD), Yoseph Bar-Cohen, Editor, July 2003, 5051, 349-356.
  10. Fofonoff, T., Martel, S., Wiseman, C., Dyer, R., Hunter, I., Hatsopoulos, N. and Donoghue, J. A highly flexible manufacturing technique for microelectrode array fabrication. Proc. of the 2nd Joint EMBS/BMES Conference, October 23-26, 2002, 3:2107-2108
Retrieved from "http://bioinstrumentation.mit.edu/mediawiki/index.php?title=BioInstrumentation_Lab:Publications&oldid=1230"
Personal tools